Journal Description
Materials
Materials
is an international peer-reviewed, open access journal on materials science and engineering published semimonthly online by MDPI. The Portuguese Materials Society (SPM), Spanish Materials Society (SOCIEMAT) and Manufacturing Engineering Society (MES) are affiliated with Materials and their members receive discounts on the article processing charges.
- Open Access— free for readers, with article processing charges (APC) paid by authors or their institutions.
- High Visibility: indexed within Scopus, SCIE (Web of Science), PubMed, PMC, Ei Compendex, CaPlus / SciFinder, Inspec, Astrophysics Data System, and other databases.
- Journal Rank: JCR - Q2 (Metallurgy & Metallurgical Engineering) / CiteScore - Q2 (Condensed Matter Physics)
- Rapid Publication: manuscripts are peer-reviewed and a first decision is provided to authors approximately 13.9 days after submission; acceptance to publication is undertaken in 2.7 days (median values for papers published in this journal in the second half of 2023).
- Recognition of Reviewers: reviewers who provide timely, thorough peer-review reports receive vouchers entitling them to a discount on the APC of their next publication in any MDPI journal, in appreciation of the work done.
- Testimonials: See what our editors and authors say about Materials.
- Companion journals for Materials include: Electronic Materials and Construction Materials.
Impact Factor:
3.4 (2022);
5-Year Impact Factor:
3.8 (2022)
Latest Articles
Preparation and Properties of Polyaniline/Hydroxypropyl Methylcellulose Composite Conductive Thin Films
Materials 2024, 17(11), 2687; https://doi.org/10.3390/ma17112687 (registering DOI) - 2 Jun 2024
Abstract
►
Show Figures
In this work, a chemical grafting polymerization method was employed to synthesize EHPMC-g-PANI self-supporting films. Polyaniline (PANI) was grafted onto hydroxypropyl methylcellulose (HPMC) modified with epichlorohydrin (EPHMC) to obtain an EHPMC-g-PANI aqueous dispersion, which was subsequently dried to form the self-supporting films. The
[...] Read more.
In this work, a chemical grafting polymerization method was employed to synthesize EHPMC-g-PANI self-supporting films. Polyaniline (PANI) was grafted onto hydroxypropyl methylcellulose (HPMC) modified with epichlorohydrin (EPHMC) to obtain an EHPMC-g-PANI aqueous dispersion, which was subsequently dried to form the self-supporting films. The introduction of HPMC, with its excellent film-forming ability and mechanical strength, successfully addressed the poor film-forming ability and mechanical properties intrinsic to PANI. Compared to in situ polymerized HPMC/PANI, the EHPMC-g-PANI exhibited significantly improved storage stability. Moreover, the fabricated EHPMC-g-PANI films displayed a more uniform and smoother morphology. The conductivity of all the films ranged from 10−2 to 10−1 S/cm, and their tensile strength reached up to 36.1 MPa. These results demonstrate that the prepared EHPMC-g-PANI holds promising potential for applications in various fields, including conductive paper, sensors, and conductive inks.
Full article
Open AccessArticle
Employing the Interpretable Ensemble Learning Approach to Predict the Bandgaps of the Halide Perovskites
by
Chao Ren, Yiyuan Wu, Jijun Zou and Bowen Cai
Materials 2024, 17(11), 2686; https://doi.org/10.3390/ma17112686 (registering DOI) - 2 Jun 2024
Abstract
Halide perovskite materials have broad prospects for applications in various fields such as solar cells, LED devices, photodetectors, fluorescence labeling, bioimaging, and photocatalysis due to their bandgap characteristics. This study compiled experimental data from the published literature and utilized the excellent predictive capabilities,
[...] Read more.
Halide perovskite materials have broad prospects for applications in various fields such as solar cells, LED devices, photodetectors, fluorescence labeling, bioimaging, and photocatalysis due to their bandgap characteristics. This study compiled experimental data from the published literature and utilized the excellent predictive capabilities, low overfitting risk, and strong robustness of ensemble learning models to analyze the bandgaps of halide perovskite compounds. The results demonstrate the effectiveness of ensemble learning decision tree models, especially the gradient boosting decision tree model, with a root mean square error of 0.090 eV, a mean absolute error of 0.053 eV, and a determination coefficient of 93.11%. Research on data related to ratios calculated through element molar quantity normalization indicates significant influences of ions at the X and B positions on the bandgap. Additionally, doping with iodine atoms can effectively reduce the intrinsic bandgap, while hybridization of the s and p orbitals of tin atoms can also decrease the bandgap. The accuracy of the model is validated by predicting the bandgap of the photovoltaic material MASn1−xPbxI3. In conclusion, this study emphasizes the positive impact of machine learning on material development, especially in predicting the bandgaps of halide perovskite compounds, where ensemble learning methods demonstrate significant advantages.
Full article
(This article belongs to the Topic Organic and Perovskite Optoelectronic Materials and Devices)
►▼
Show Figures
Figure 1
Open AccessArticle
Synthesis and Performance of Polycarboxylate Superplasticizer with Viscosity-Reducing and Low-Shrinkage Properties for Fair-Faced Concrete
by
Wei Li, Chunxiang Qian, Chunyang Zheng, Haidong Jiang, Zhenxiao Yu, Zefan Wu and Zhuang Zhou
Materials 2024, 17(11), 2685; https://doi.org/10.3390/ma17112685 (registering DOI) - 2 Jun 2024
Abstract
A low-shrinkage and viscosity-reducing polycarboxylate superplasticizer was synthesized with maleic anhydride (MAH), diethylene glycol monobutyl ether, and methoxypoly (ethylene glycol) methacrylate (MPEGnMA). The surface tension, early shrinkage, cement paste performance, and application performance of concrete made with the synthesized water-reducing admixture
[...] Read more.
A low-shrinkage and viscosity-reducing polycarboxylate superplasticizer was synthesized with maleic anhydride (MAH), diethylene glycol monobutyl ether, and methoxypoly (ethylene glycol) methacrylate (MPEGnMA). The surface tension, early shrinkage, cement paste performance, and application performance of concrete made with the synthesized water-reducing admixture were tested. A series of experiments were conducted to determine the optimal range of plastic viscosity coefficients for producing high-quality, fair-faced concrete with minimal surface defects. These experiments utilized both the synthesized water-reducing admixture alone and in combination with other water-reducing agents. The results showed that the synthesized water-reducing admixture had an ideal molecular structure, as confirmed by the GPC spectrum. When added to an aqueous solution, it reduced the surface tension from 72.47 mN/m to 30.56 mN/m. The 72 h shrinkage value of concrete was reduced by 20.6% compared with that of the conventional control group, effectively reducing shrinkage and adjusting the viscosity of the concrete mixture. Additionally, the influence of the plastic viscosity coefficient on the apparent voids in fair-faced concrete was investigated. This study revealed that when the plastic viscosity coefficient was between 5 and 10 Pa·s, the apparent void grade of the fair-faced concrete was simultaneously excellent and good. This water-reducing admixture helped prevent surface cracking and voids in fair-faced concrete, making it a suitable choice for producing high-quality fair-faced concrete surfaces.
Full article
(This article belongs to the Section Construction and Building Materials)
►▼
Show Figures
Figure 1
Open AccessArticle
From Facile One-Pot Synthesis of Semi-Degradable Amphiphilic Miktoarm Polymers to Unique Degradation Properties
by
Maria Kupczak, Anna Mielańczyk, Tomasz Fronczyk, Patryk Drejka, Przemyslaw Ledwon and Dorota Neugebauer
Materials 2024, 17(11), 2684; https://doi.org/10.3390/ma17112684 (registering DOI) - 2 Jun 2024
Abstract
We report a one-pot synthesis of well-defined A5B and A8B miktoarm star-shaped polymers where N,N-dimethylaminoethyl methacrylate (DMAEMA) and various cyclic esters such as ε-caprolactone (ε-CL), lactide (LA) and glycolide (GA) were used for the synthesis. Miktopolymers were obtained
[...] Read more.
We report a one-pot synthesis of well-defined A5B and A8B miktoarm star-shaped polymers where N,N-dimethylaminoethyl methacrylate (DMAEMA) and various cyclic esters such as ε-caprolactone (ε-CL), lactide (LA) and glycolide (GA) were used for the synthesis. Miktopolymers were obtained by simultaneously carrying out atom transfer radical polymerization (ATRP) of DMAEMA, ring-opening polymerization (ROP) of cyclic esters, and click reaction between the azide group in gluconamide-based (GLBr5-Az) or lactonamide-based (GLBr8-Az) ATRP initiators and 4-pentyn-1-ol. The relatively low dispersity indices of the obtained miktoarm stars (Đ = 1.2–1.6) indicate that control over the polymerization processes was sustained despite almost complete monomers conversions (83–99%). The presence of salts from phosphate-buffered saline (PBS) in polymer solutions affects the phase transition, increasing cloud point temperatures (TCP) values. The critical aggregation concentration (CAC) values increased with a decreasing number of average molecular weights of the hydrophobic fraction. Hydrolytic degradation studies revealed that the highest reduction of molecular weight was observed for polymers with PCL and PLGCL arm. The influence of the composition on the miktopolymers hydrophilicity was investigated via water contact angle (WCA) measurement. Thermogravimetric analysis (TGA) disclosed that the number of arms and their composition in the miktopolymer affects its weight loss under the influence of temperature.
Full article
(This article belongs to the Special Issue Novel Antimicrobial Polymers: Synthesis, Properties and Applications)
►▼
Show Figures
Figure 1
Open AccessArticle
Long-Term Corrosion of Eutectic Gallium, Indium, and Tin (EGaInSn) Interfacing with Diamond
by
Stephan Handschuh-Wang, Tao Wang, Zongyan Zhang, Fucheng Liu, Peigang Han and Xiaorui Liu
Materials 2024, 17(11), 2683; https://doi.org/10.3390/ma17112683 (registering DOI) - 2 Jun 2024
Abstract
Thermal transport is of grave importance in many high-value applications. Heat dissipation can be improved by utilizing liquid metals as thermal interface materials. Yet, liquid metals exhibit corrosivity towards many metals used for heat sinks, such as aluminum, and other electrical devices (i.e.,
[...] Read more.
Thermal transport is of grave importance in many high-value applications. Heat dissipation can be improved by utilizing liquid metals as thermal interface materials. Yet, liquid metals exhibit corrosivity towards many metals used for heat sinks, such as aluminum, and other electrical devices (i.e., copper). The compatibility of the liquid metal with the heat sink or device material as well as its long-term stability are important performance variables for thermal management systems. Herein, the compatibility of the liquid metal Galinstan, a eutectic alloy of gallium, indium, and tin, with diamond coatings and the stability of the liquid metal in this environment are scrutinized. The liquid metal did not penetrate the diamond coating nor corrode it. However, the liquid metal solidified with the progression of time, starting from the second year. After 4 years of aging, the liquid metal on all samples solidified, which cannot be explained by the dissolution of aluminum from the titanium alloy. In contrast, the solidification arose from oxidation by oxygen, followed by hydrolysis to GaOOH due to the humidity in the air. The hydrolysis led to dealloying, where In and Sn remained an alloy while Ga separated as GaOOH. This hydrolysis has implications for many devices based on gallium alloys and should be considered during the design phase of liquid metal-enabled products.
Full article
(This article belongs to the Special Issue Liquid Metals: From Fundamentals to Applications)
►▼
Show Figures
Figure 1
Open AccessReview
Review Study on Mechanical Properties of Cellular Materials
by
Safdar Iqbal and Marcin Kamiński
Materials 2024, 17(11), 2682; https://doi.org/10.3390/ma17112682 (registering DOI) - 2 Jun 2024
Abstract
Cellular materials are fundamental elements in civil engineering, known for their porous nature and lightweight composition. However, the complexity of its microstructure and the mechanisms that control its behavior presents ongoing challenges. This comprehensive review aims to confront these uncertainties head-on, delving into
[...] Read more.
Cellular materials are fundamental elements in civil engineering, known for their porous nature and lightweight composition. However, the complexity of its microstructure and the mechanisms that control its behavior presents ongoing challenges. This comprehensive review aims to confront these uncertainties head-on, delving into the multifaceted field of cellular materials. It highlights the key role played by numerical and mathematical analysis in revealing the mysterious elasticity of these structures. Furthermore, the review covers a range of topics, from the simulation of manufacturing processes to the complex relationships between microstructure and mechanical properties. This review provides a panoramic view of the field by traversing various numerical and mathematical analysis methods. Furthermore, it reveals cutting-edge theoretical frameworks that promise to redefine our understanding of cellular solids. By providing these contemporary insights, this study not only points the way for future research but also illuminates pathways to practical applications in civil and materials engineering.
Full article
(This article belongs to the Special Issue Advances in Design and Characterization of Graded and Hierarchical Honeycomb Materials)
Open AccessArticle
Properties of Biocomposites Made of Extruded Apple Pomace and Potato Starch: Mechanical and Physicochemical Properties
by
Adam Ekielski, Tomasz Żelaziński, Ryszard Kulig and Adam Kupczyk
Materials 2024, 17(11), 2681; https://doi.org/10.3390/ma17112681 (registering DOI) - 2 Jun 2024
Abstract
This paper presents research results on biocomposites made from a combination of extruded apple pomace (EAP) and potato starch (SP). The aim of this work was to investigate the basic properties of biocomposites obtained from extruded apple pomace reinforced with potato starch. The
[...] Read more.
This paper presents research results on biocomposites made from a combination of extruded apple pomace (EAP) and potato starch (SP). The aim of this work was to investigate the basic properties of biocomposites obtained from extruded apple pomace reinforced with potato starch. The products were manufactured by hot pressing using a hydraulic press with a mould for producing samples. The prepared biocomposites were subjected to strength tests, surface wettability was determined, and a colour analysis was carried out. A thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), and cross-sectioning observed in a scanning electron microscope (SEM) were also performed. The obtained test results showed that the combination of apple pomace (EAP) and starch (SP) enabled the production of compact biocomposite materials. At the same time, it was found that each increase in the share of starch in the mixture for producing biocomposites increased the strength parameters of the obtained materials. With the highest share of starch in the mixture, 40%, and a raw material moisture content of 14%, the material had the best strength parameters and was even characterised by hydrophobic properties. It was also found that materials with a high content of starch are characterised by increased temperature resistance. The analysis of SEM microscopic photos showed well-glued particles of apple pomace, pectin, and gelatinised starch and a smooth external structure of the samples. Research and analyses have shown that apple pomace reinforced only with the addition of starch can be a promising raw material for the production of simple, biodegradable biocomposite materials.
Full article
(This article belongs to the Section Green Materials)
Open AccessArticle
Experimental Research on Gradation Range and Performance of SMAC13
by
Qianqian Zhen, Weidong Cao, Rui Dong, Shutang Liu, Ning Liu, Zunhao Zhan and Yingjian Li
Materials 2024, 17(11), 2680; https://doi.org/10.3390/ma17112680 (registering DOI) - 2 Jun 2024
Abstract
►▼
Show Figures
Stone matrix asphalt and asphalt concrete mixture with 13.2 mm nominal maximum aggregate size (named SMA13 and AC13, respectively) are widely used in the surface course of asphalt pavement in China. Generally, the pavement performance of SMA13 is superior to that of AC13,
[...] Read more.
Stone matrix asphalt and asphalt concrete mixture with 13.2 mm nominal maximum aggregate size (named SMA13 and AC13, respectively) are widely used in the surface course of asphalt pavement in China. Generally, the pavement performance of SMA13 is superior to that of AC13, while the cost of the former is significantly higher than that of the latter. The objective of this paper was to develop a new hot mix asphalt (named SMAC13) whose performance and cost are between SMA13 and AC13. A boundary sieve size (BSS) of 2.36 mm was selected between fine and coarse aggregates. Based on the union set of aggregate gradation ranges of SMA13 and AC13, the family of gradation curves in the forms of S shapes were designed in terms of the BSS passing rate. According to the evaluation of the skeleton interlock of coarse aggregate of the gradation curve family, the aggregate gradation range of SMAC13 was determined. Also, the performance of three kinds of asphalt mixtures were compared through laboratory tests. The results indicated that SMA13 shows the best rutting resistance, followed by SMAC13 then AC13, while in terms of low-temperature performance in resistance to cracking, the sequence is SMAC13, AC13, and SMA13. The sequence of water stability is AC13, SMAC13, and SMA13. Furthermore, the cost of SMAC13 is 25% less than that of SMA13. Therefore, SMAC13 can be used as an alternative for the surface course of asphalt pavement in terms of performance and cost.
Full article
Figure 1
Open AccessArticle
Mo-Doped Na4Fe3(PO4)2P2O7/C Composites for High-Rate and Long-Life Sodium-Ion Batteries
by
Tongtong Chen, Xianying Han, Mengling Jie, Zhiwu Guo, Jiangang Li and Xiangming He
Materials 2024, 17(11), 2679; https://doi.org/10.3390/ma17112679 (registering DOI) - 1 Jun 2024
Abstract
Na4Fe3(PO4)2P2O7/C (NFPP) is a promising cathode material for sodium-ion batteries, but its electrochemical performance is heavily impeded by its low electronic conductivity. To address this, pure-phase Mo6+-doped Na4
[...] Read more.
Na4Fe3(PO4)2P2O7/C (NFPP) is a promising cathode material for sodium-ion batteries, but its electrochemical performance is heavily impeded by its low electronic conductivity. To address this, pure-phase Mo6+-doped Na4Fe3−xMox(PO4)2P2O7/C (Mox-NFPP, x = 0, 0.05, 0.10, 0.15) with the Pn21a space group is successfully synthesized through spray drying and annealing methods. Density functional theory (DFT) calculations reveal that Mo6+ doping facilitates the transition of electrons from the valence to the conduction band, thus enhancing the intrinsic electron conductivity of Mox-NFPP. With an optimal Mo6+ doping level of x = 0.10, Mo0.10-NFPP exhibits lower charge transfer resistance, higher sodium-ion diffusion coefficients, and superior rate performance. As a result, the Mo0.10-NFPP cathode offers an initial discharge capacity of up to 123.9 mAh g−1 at 0.1 C, nearly reaching its theoretical capacity. Even at a high rate of 10 C, it delivers a high discharge capacity of 86.09 mAh g−1, maintaining 96.18% of its capacity after 500 cycles. This research presents a new and straightforward strategy to enhance the electrochemical performance of NFPP cathode materials for sodium-ion batteries.
Full article
(This article belongs to the Special Issue The 15th Anniversary of Materials—Recent Advances in Materials Chemistry)
►▼
Show Figures
Graphical abstract
Open AccessArticle
DRAGenin Application—An Approach for Microstructural Fatigue Predictions of Non-Oriented Electrical Steel Sheets
by
Manuel Henrich and Sebastian Münstermann
Materials 2024, 17(11), 2678; https://doi.org/10.3390/ma17112678 (registering DOI) - 1 Jun 2024
Abstract
This study investigates multiple cyclic loading scenarios of non-oriented electrical steel sheets through both experimental and numerical approaches. The numerical simulations were conducted using Representative Volume Elements generated with DRAGen. DRAGen allowed for the generation of Representative Volume Elements with a non-cubic shape
[...] Read more.
This study investigates multiple cyclic loading scenarios of non-oriented electrical steel sheets through both experimental and numerical approaches. The numerical simulations were conducted using Representative Volume Elements generated with DRAGen. DRAGen allowed for the generation of Representative Volume Elements with a non-cubic shape to cover the complete sheet thickness and enough grains to represent the material’s texture. The experimental results, on the other hand, are utilized to calibrate and validate a prediction model, highlighting the significance of accumulated plastic slip as a suitable parameter correlated with fatigue life. Using the accumulated plastic slip from the simulations, a fatigue fracture locus is introduced, which describes a 3D surface dependent on the maximum stress, fatigue life, and the fatigue stress ratio. The study shows reliable results for the fatigue life prediction using the calibrated fatigue fracture locus. While substantial progress has been made in predicting the fatigue life at multiple fatigue stress ratios, notable disparities between experimental and simulation results suggest the need for further investigations regarding the influence of the surface quality. This observation motivates ongoing research efforts aimed at refining simulation methodologies to better incorporate surface roughness effects. In summary, this study presents a validated model for predicting fatigue life in non-oriented electrical steel sheets, offering valuable insights into material behavior at different loading scenarios and informing future research directions for enhanced structural performance and durability.
Full article
(This article belongs to the Special Issue Microstructure and Mechanical Properties Relationship for Metallic Materials (2nd Edition))
Open AccessArticle
Exploring the Effect of Specimen Size on Elastic Properties of Fused-Filament-Fabrication-Printed Polycarbonate and Thermoplastic Polyurethane
by
Charul Chadha, Gabriel Olaivar, Mahmoud A. Mahrous, Albert E. Patterson and Iwona Jasiuk
Materials 2024, 17(11), 2677; https://doi.org/10.3390/ma17112677 (registering DOI) - 1 Jun 2024
Abstract
Additive manufacturing (AM) is often used to create designs inspired by topology optimization and biological structures, yielding unique cross-sectional geometries spanning across scales. However, manufacturing defects intrinsic to AM can affect material properties, limiting the applicability of a uniform material model across diverse
[...] Read more.
Additive manufacturing (AM) is often used to create designs inspired by topology optimization and biological structures, yielding unique cross-sectional geometries spanning across scales. However, manufacturing defects intrinsic to AM can affect material properties, limiting the applicability of a uniform material model across diverse cross-sections. To examine this phenomenon, this paper explores the influence of specimen size and layer height on the compressive modulus of polycarbonate (PC) and thermoplastic polyurethane (TPU) specimens fabricated using fused filament fabrication (FFF). Micro-computed tomography imaging and compression testing were conducted on the printed samples. The results indicate that while variations in the modulus were statistically significant due to both layer height and size of the specimen in TPU, variations in PC were only statistically significant due to layer height. The highest elastic modulus was observed at a 0.2 mm layer height for both materials across different sizes. These findings offer valuable insights into design components for FFF, emphasizing the importance of considering mechanical property variations due to feature size, especially in TPU. Furthermore, locations with a higher probability of failure are recommended to be printed closer to the print bed, especially for TPU, because of the lower void volume fraction observed near the heated print bed.
Full article
(This article belongs to the Special Issue Advances in Additive Manufacturing (Volume II))
►▼
Show Figures
Figure 1
Open AccessArticle
In Situ Study of Precipitates’ Effect on Grain Deformation Behavior and Mechanical Properties of S31254 Super Austenitic Stainless Steel
by
Jinyao Ma, Huanyu Tan, Nan Dong, Jiemin Gao, Puli Wang, Zhihua Wang and Peide Han
Materials 2024, 17(11), 2676; https://doi.org/10.3390/ma17112676 (registering DOI) - 1 Jun 2024
Abstract
Grain boundary (GB) precipitation-induced cracking is a significant issue for S31254 super austenitic stainless steel during hot working. Investigating the deformation behavior based on precipitate morphology and distribution is essential. In this study, continuous smaller and intermittent larger precipitates were obtained through heat
[...] Read more.
Grain boundary (GB) precipitation-induced cracking is a significant issue for S31254 super austenitic stainless steel during hot working. Investigating the deformation behavior based on precipitate morphology and distribution is essential. In this study, continuous smaller and intermittent larger precipitates were obtained through heat treatments at 950 °C and 1050 °C. The microstructure evolution and mechanical properties influenced by precipitates were experimentally investigated using an in situ tensile stage inside a scanning electron microscope (SEM) combined with electron backscatter diffraction (EBSD). The results showed that continuous precipitates at 950 °C had a stronger pinning effect on the GB, making grain rotation difficult and promoting slip deformation in the plastic interval. Continuous precipitates caused severe stress concentration near GB and reduced coordinated deformation ability. Additionally, the crack propagation path changed from transcrystalline to intercrystalline. Furthermore, internal precipitates were a crucial factor affecting the initial crack nucleation position. Interconnected precipitates led to an intergranular fracture tendency and severe deterioration of the material’s plasticity, as observed in fracture morphology.
Full article
(This article belongs to the Special Issue Advances in Mechanical Properties and Structure of Metal and Metal Composites)
►▼
Show Figures
Figure 1
Open AccessReview
Recycling Functional Fillers from Waste Tires for Tailored Polystyrene Composites: Mechanical, Fire Retarding, Electromagnetic Field Shielding, and Acoustic Insulation Properties—A Short Review
by
Jinlong Zhang, Hang Liu, Shyam S. Sablani and Qinglin Wu
Materials 2024, 17(11), 2675; https://doi.org/10.3390/ma17112675 (registering DOI) - 1 Jun 2024
Abstract
Polymer waste is currently a big and challenging issue throughout the world. Waste tires represent an important source of polymer waste. Therefore, it is highly desirable to recycle functional fillers from waste tires to develop composite materials for advanced applications. The primary theme
[...] Read more.
Polymer waste is currently a big and challenging issue throughout the world. Waste tires represent an important source of polymer waste. Therefore, it is highly desirable to recycle functional fillers from waste tires to develop composite materials for advanced applications. The primary theme of this review involves an overview of developing polystyrene (PS) composites using materials from recycled tires as fillers; waste tire recycling in terms of ground tire rubbers, carbon black, and textile fibers; surface treatments of the fillers to optimize various composite properties; and the mechanical, fire retarding, acoustic, and electromagnetic field (EMI) shielding performances of PS composite materials. The development of composite materials from polystyrene and recycled waste tires provides a novel avenue to achieve reductions in carbon emission goals and closed-loop plastic recycling, which is of significance in the development of circular economics and an environmentally friendly society.
Full article
(This article belongs to the Topic Rubbers and Elastomers Materials)
►▼
Show Figures
Figure 1
Open AccessArticle
Preparation and Performance Study of Rapid Repair Epoxy Concrete for Bridge Deck Pavement
by
Linhao Sun, Xinling Hao, Jilei He, Yingchun Cai, Pan Guo and Qingwen Ma
Materials 2024, 17(11), 2674; https://doi.org/10.3390/ma17112674 (registering DOI) - 1 Jun 2024
Abstract
With the rapid development of bridge construction, the service life of bridges and traffic volume continue to increase, leading to the gradual appearance of diseases such as potholes and cracks in bridge deck pavements under repeated external loads. These issues severely impact the
[...] Read more.
With the rapid development of bridge construction, the service life of bridges and traffic volume continue to increase, leading to the gradual appearance of diseases such as potholes and cracks in bridge deck pavements under repeated external loads. These issues severely impact the safety and service life of bridges. The repair of bridge deck potholes and cracks is crucial for ensuring the integrity and safety of bridge structures. Rapid repair materials designed for this purpose play a critical role in effectively and efficiently addressing these issues. In order to address the issues of pavement diseases, this study focuses on the rapid repair of epoxy concrete for bridge deck pavements and its performance is studied using experimental methods. Firstly, carbon black, rubber powder, and other materials were used to improve the elastic modulus and aging resistance of the epoxy concrete. Secondly, the addition of solid asphalt particles provided thermal sensitivity to the repair material. Finally, various properties of the rapid repair epoxy concrete for bridge deck pavements were tested through experiments including compressive strength testing, elastic modulus measurement, thermal sensitivity testing, and anti-UV aging testing. The experimental results show that adding carbon black and rubber powder reduces the elastic modulus of epoxy concrete by 25% compared to normal epoxy concrete, while increasing its aging resistance by 1.8%. The inclusion of solid asphalt particles provided thermal sensitivity to the repair material, contributing to better stress coordination between the repair material and the original pavement material under different temperature conditions. The epoxy concrete has early strength, toughness, and anti-aging properties, making it suitable for rapid repair of bridge deck pavement.
Full article
(This article belongs to the Special Issue Advances in Sustainable Construction Materials, Second Volume)
Open AccessArticle
Effects of Hydrogen Plasma Treatment on the Electrical Behavior of Solution-Processed ZnO Thin Films
by
Ji-In Park, Hyun Uk Lee, Christopher Pearson, Michael C. Petty and Yesul Jeong
Materials 2024, 17(11), 2673; https://doi.org/10.3390/ma17112673 (registering DOI) - 1 Jun 2024
Abstract
In this study, the effect of atmospheric hydrogen plasma treatment on the in-plane conductivity of solution-processed zinc oxide (ZnO) in various environments is reported. The hydrogen-plasma-treated and untreated ZnO films exhibited ohmic behavior with room-temperature in-plane conductivity in a vacuum. When the untreated
[...] Read more.
In this study, the effect of atmospheric hydrogen plasma treatment on the in-plane conductivity of solution-processed zinc oxide (ZnO) in various environments is reported. The hydrogen-plasma-treated and untreated ZnO films exhibited ohmic behavior with room-temperature in-plane conductivity in a vacuum. When the untreated ZnO film was exposed to a dry oxygen environment, the conductivity rapidly decreased, and an oscillating current was observed. In certain cases, the thin film reversibly ‘switched’ between the high- and low-conductivity states. In contrast, the conductivity of the hydrogen-plasma-treated ZnO film remained nearly constant under different ambient conditions. We infer that hydrogen acts as a shallow donor, increasing the carrier concentration and generating oxygen vacancies by eliminating the surface contamination layer. Hence, atmospheric hydrogen plasma treatment could play a crucial role in stabilizing the conductivity of ZnO films.
Full article
(This article belongs to the Special Issue The Microstructures and Advanced Functional Properties of Thin Films)
►▼
Show Figures
Graphical abstract
Open AccessArticle
Hexakis[p-(hydroxymethyl)phenoxy]cyclotriphosphazene as an Environmentally Friendly Modifier for Polyurethane Powder Coatings with Increased Thermal Stability and Corrosion Resistance
by
Barbara Pilch-Pitera, Dominika Czachor-Jadacka, Łukasz Byczyński, Michał Dutkiewicz, Rafał Januszewski, Krzysztof Kowalczyk, Wojciech J. Nowak and Katarzyna Pojnar
Materials 2024, 17(11), 2672; https://doi.org/10.3390/ma17112672 (registering DOI) - 1 Jun 2024
Abstract
Protection against fire and the corrosion of metals is necessary to ensure human safety. Most of the fire and corrosion inhibitors do not meet the ecological requirements. Therefore, effective and ecological methods of protecting metals are currently a challenge for researchers. In this
[...] Read more.
Protection against fire and the corrosion of metals is necessary to ensure human safety. Most of the fire and corrosion inhibitors do not meet the ecological requirements. Therefore, effective and ecological methods of protecting metals are currently a challenge for researchers. In this work, the influence of hexakis(4-(hydroxymethyl)phenoxy)cyclotriphosphazene (HHPCP) on the characteristics of powder coatings was examined. The coatings’ properties were investigated by measuring the roughness, hardness, adhesion to the steel surface, cupping, gloss, scratch resistance, and water contact angle. The thermal stability was studied by furnace test and TGA analysis. The corrosion resistance test was carried out in a 3.5% NaCl solution. The distribution of phosphazene-derived segments in the coating was examined by GD-EOS analysis. Modified coatings show better corrosion and thermal resistance and can be used for the protection of the steel surface. Their better corrosion resistance is due to the electroactive properties of the phosphazene ring and its higher concentration at the coating surface, confirmed by GD-EOS analysis. The increase in thermal resistance is due to the effect of the formation of phosphoric metaphosphoric and polyphosphoric acids during the decomposition of HHCPC, which remain in the condensed char phase and play a crucial role in surface protection.
Full article
(This article belongs to the Special Issue Recent Advances and Emerging Challenges in Functional Coatings)
►▼
Show Figures
Graphical abstract
Open AccessArticle
Freeze–Thaw Cycle Durability and Mechanism Analysis of Zeolite Powder-Modified Recycled Concrete
by
Teng Yu, Yimeng Zhang, Liang Cao, Peng Cao, Changjun Zhou and Shenglong Gu
Materials 2024, 17(11), 2671; https://doi.org/10.3390/ma17112671 (registering DOI) - 1 Jun 2024
Abstract
The inferior mechanical performance and freeze–thaw (FT) resistance of recycled concrete are mostly due to the significant water absorption and porosity of recycled coarse particles. In this study, different dosages of zeolite powder were used in recycled concrete. A series of macroscopic tests
[...] Read more.
The inferior mechanical performance and freeze–thaw (FT) resistance of recycled concrete are mostly due to the significant water absorption and porosity of recycled coarse particles. In this study, different dosages of zeolite powder were used in recycled concrete. A series of macroscopic tests were used to evaluate the workability and FT durability of zeolite powder-modified recycled concrete (ZPRC). X-ray diffraction (XRD) and scanning electron microscopy (SEM) were used to reveal the micro-mechanisms of FT resistance in ZPRC. The results show that the increase in zeolite powder content leads to a decrease in the slump and water absorption of ZPRC. Additionally, ZPRC with 10% zeolite powder has superior mechanical characteristics and tolerance to FT conditions. The higher strength and FT resistance of the ZPRC can be attributed to the particle-filling effect, water storage function, and pozzolanic reaction of zeolite powder, which results in a denser microstructure. The particle-filling effect of zeolite powder promotes the reduction of surface pores in recycled coarse aggregates (RCAs). The water storage function of zeolite powder can provide water for the secondary hydration of cement particles while reducing the free water content in ZPRC. The pozzolanic reaction of zeolite powder can also promote the generation of hydrated calcium silicate and anorthite, thereby making the microstructure of ZPRC more compact. These results provide theoretical guidance for the engineering application of recycled concrete in cold regions.
Full article
(This article belongs to the Section Construction and Building Materials)
►▼
Show Figures
Figure 1
Open AccessArticle
Influence of Excitation Parameters on Finishing Characteristics in Magnetorheological Finishing for 6063 Aluminum Alloy
by
Yiming Fang and Jinzhong Wu
Materials 2024, 17(11), 2670; https://doi.org/10.3390/ma17112670 (registering DOI) - 1 Jun 2024
Abstract
The present work is aimed at studying the effects of the magnetorheological finishing process, using a low-frequency alternating magnetic field, on the finishing performance of 6063 aluminum alloy. The study investigates the influence of key excitation parameters such as current, frequency, excitation gap,
[...] Read more.
The present work is aimed at studying the effects of the magnetorheological finishing process, using a low-frequency alternating magnetic field, on the finishing performance of 6063 aluminum alloy. The study investigates the influence of key excitation parameters such as current, frequency, excitation gap, and iron powder diameter on the material removal and surface roughness (Ra) of the finished workpiece by experiments. This study employs a single-factor experimental method, and the finish surface is analyzed by a Zigo non-contact white light interferometer. The magnetic field strength in the processing area increases with the increase in the excitation current and decreases with the increase in the excitation gap. When the current frequency is set to 1 Hz, the circulation and renewal of abrasives in the magnetic cluster is most sufficient, resulting in the optimal surface roughness value for the workpiece. According to the experimental results of the excitation parameters, more suitable process parameters were selected for a two-stage finishing experiment. The surface roughness of 6063 aluminum alloy was improved from 285 nm to 3.54 nm. Experimental results highlighted that the magnetorheological finishing using a low-frequency alternating magnetic field is a potential technique for obtaining nano-scale finishing of the 6063 aluminum alloy.
Full article
(This article belongs to the Section Manufacturing Processes and Systems)
Open AccessArticle
Use of Periodic Mesoporous Organosilica–Benzene Adsorbent for CO2 Capture to Reduce the Greenhouse Effect
by
David Cantador-Fernandez, Dolores Esquivel, José Ramón Jiménez and José María Fernández-Rodríguez
Materials 2024, 17(11), 2669; https://doi.org/10.3390/ma17112669 (registering DOI) - 1 Jun 2024
Abstract
►▼
Show Figures
The CO2 adsorption of a phenylene-bridged ordered mesoporous organosilica (PMO–benzene) was analyzed. The maximum capture capacity was 638.2 mg·g−1 (0 °C and 34 atm). Approximately 0.43 g would be enough to reduce the amount of atmospheric CO2 in 1 m
[...] Read more.
The CO2 adsorption of a phenylene-bridged ordered mesoporous organosilica (PMO–benzene) was analyzed. The maximum capture capacity was 638.2 mg·g−1 (0 °C and 34 atm). Approximately 0.43 g would be enough to reduce the amount of atmospheric CO2 in 1 m3 to pre-industrial levels. The CO2 adsorption data were analyzed using several isotherm models, including Langmuir, Freundlich, Sips, Toth, Dubinin–Radushkevich, and Temkin models. This study confirmed the capability of this material for use in reversible CO2 capture with a minimal loss of capacity (around 1%) after 10 capture cycles. Various techniques were employed to characterize this material. The findings from this study can help mitigate the greenhouse effect caused by CO2.
Full article
Graphical abstract
Open AccessArticle
Micro-Milling of Additively Manufactured Al-Si-Mg Aluminum Alloys
by
Qiongyi He, Xiaochong Kang and Xian Wu
Materials 2024, 17(11), 2668; https://doi.org/10.3390/ma17112668 (registering DOI) - 1 Jun 2024
Abstract
Additively manufactured aluminum alloy parts attract extensive applications in various felids. To study the machinability of additively manufactured aluminum alloys, micro-milling experiments were conducted on the additively manufactured AlSi7Mg and AlSi10Mg. By comparing the machinability of Al-Si-Mg aluminum alloys with different Si content,
[...] Read more.
Additively manufactured aluminum alloy parts attract extensive applications in various felids. To study the machinability of additively manufactured aluminum alloys, micro-milling experiments were conducted on the additively manufactured AlSi7Mg and AlSi10Mg. By comparing the machinability of Al-Si-Mg aluminum alloys with different Si content, the results show that due to the higher hardness of the AlSi10Mg, the cutting forces are higher than the AlSi7Mg by about 11.8% on average. Due to the increased Si content in additively manufactured Al-Si-Mg aluminum alloys, the surface roughness of AlSi10Mg is 26.9% higher than AlSi7Mg on average. The burr morphology of additively manufactured aluminum alloys in micro-milling can be divided into fence shape and branch shape, which are, respectively, formed by the plastic lateral flow and unseparated chips. The up-milling edge exhibits a greater burr width than the down-milling edge. Due to the better plasticity of AlSi7Mg, the burr width of the down-milling edge is 28.1% larger, and the burr width of the up-milling edge is 10.1% larger than the AlSi10Mg. This research can provide a guideline for the post-machining of additively manufactured aluminum alloys.
Full article
(This article belongs to the Special Issue Cutting Processes for Materials in Manufacturing)
►▼
Show Figures
Figure 1
Journal Menu
► ▼ Journal Menu-
- Materials Home
- Aims & Scope
- Editorial Board
- Reviewer Board
- Topical Advisory Panel
- Instructions for Authors
- Special Issues
- Topics
- Sections & Collections
- Article Processing Charge
- Indexing & Archiving
- Editor’s Choice Articles
- Most Cited & Viewed
- Journal Statistics
- Journal History
- Journal Awards
- Society Collaborations
- Conferences
- Editorial Office
Journal Browser
► ▼ Journal BrowserHighly Accessed Articles
Latest Books
E-Mail Alert
News
Topics
Topic in
Bioengineering, JMMP, Materials, Micromachines, Polymers
Advances in Filament Engineering for Biomaterials
Topic Editors: Ming-Wei Chang, Zeeshan Ahmad, Hui-Min David WangDeadline: 30 June 2024
Topic in
Catalysts, Coatings, Crystals, Energies, Materials, Nanomaterials
Interfacial Bonding Design and Applications in Structural and Functional Materials
Topic Editors: Junlei Qi, Pengcheng Wang, Yaotian YanDeadline: 20 July 2024
Topic in
Coatings, CMD, Materials, Metals, Molecules
Corrosion and Protection of Metallic Materials, 2nd Edition
Topic Editors: Sebastian Feliú, Jr., Federico R. García-Galván, Lucien VelevaDeadline: 31 July 2024
Topic in
Atmosphere, Buildings, Materials, Remote Sensing, Sensors
Condition Perception and Performance Evaluation of Engineering Structures
Topic Editors: Jingzhou Xin, Hong Zhang, Yan Jiang, Simon X. YangDeadline: 31 August 2024
Conferences
Special Issues
Special Issue in
Materials
Structural Health Monitoring of Polymer Composites
Guest Editors: Patricia Krawczak, Salim ChakiDeadline: 10 June 2024
Special Issue in
Materials
Thermal Behavior of Polymeric and Other Advanced Materials
Guest Editors: Małgorzata Maciejewska, Magdalena RogulskaDeadline: 30 June 2024
Special Issue in
Materials
Advances in Nanomaterials and Molecules and Their Applications on Environment Recovery and Release Systems
Guest Editors: Fernando Gomes de Souza Junior, Diganta Bhusan DasDeadline: 20 July 2024
Special Issue in
Materials
Nuclear Materials Fundamentals and Applications
Guest Editors: Zhoutong He, Min Liu, Wei QiDeadline: 30 July 2024
Topical Collections
Topical Collection in
Materials
3D Printing in Medicine and Biomedical Engineering
Collection Editor: Filip Górski
Topical Collection in
Materials
Catalysts: Preparation, Catalytic Performance and Catalytic Reaction
Collection Editors: Gina Pecchi, Cristian H. Campos
Topical Collection in
Materials
Microstructure and Corrosion Behavior of Advanced Alloys
Collection Editor: Marián Palcut
Topical Collection in
Materials
Manufacturing Engineering and Mechanical Properties of Composite Materials
Collection Editor: Aminul Islam